Zenith-data-systems MT2000 User Manual download pdf (Page 101)

5-13

Upgrades and Options

Figure 5-4. Installing an Optional Pentium Processor

3. Position the processor (C) over its ZIF socket (B) so

that the processor pins align with the socket holes.

Note that the pins get denser as they get closer to

the lever on the ZIF socket.

4. Insert the processor pins into the socket. Apply

pressure equally over the top surface of the

processor until it seats in the socket. The processor

should easily fit, do not force the processor into the

socket.

5. Push ZIF socket lever (G) down until it snaps into

the locked position.

Position the heat sink above the processor so the

largest of the two detention clips (D) aligns with the

lever on the ZIF socket.

Tip the heat sink so that the smallest detention clip

fits over the tabs at the base of the socket. Press the

other side of the heat sink down and snap the

detention clip over the socket tabs.

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 204 205

No comments

Zenith-data-systems MT2000 User Manual Page 101